Wild Boar Audio Street Glide® Complete Kit

Wild Boar Audio 'WBASG KIT' - $799.95

Tired of not hearing your music no matter how high you turn it up? This 400 watt front speaker amplifier kit designed for 2014 and newer Harley-Davidson® Street Glide motorcycles, is a complete plug and play installation system consisting of a 2-channel amplifier and direct fit 6.5” speakers. It comes complete with everything you need to start rocking out while you ride.
  • Drag Specialties part #4405-0459
  • 400 watt 2 channel Class D amp, inside fairing top of the radio mount
  • WBC 1654 Front speakers with one piece design for seamless installation
  • Designed specifically for OEM factory speaker cabinets
  • No Corporate logos on speaker grills
  • High grade wiring with factory fit connectors for plug and play installation
  • Complete with all required installation hardware
  • 5 Year Warranty on Speakers / 3 Year Warranty on Amplifier
  • Note: May require a OEM or Techno Research dealer radio software “re-flash”

$799.95

Wild Boar Audio 'WBASG KIT' - $799.95

Tired of not hearing your music no matter how high you turn it up? This 400 watt front speaker amplifier kit designed for 2014 and newer Harley-Davidson® Street Glide motorcycles, is a complete plug and play installation system consisting of a 2-channel amplifier and direct fit 6.5” speakers. It comes complete with everything you need to start rocking out while you ride.
  • Drag Specialties part #4405-0459
  • 400 watt 2 channel Class D amp, inside fairing top of the radio mount
  • WBC 1654 Front speakers with one piece design for seamless installation
  • Designed specifically for OEM factory speaker cabinets
  • No Corporate logos on speaker grills
  • High grade wiring with factory fit connectors for plug and play installation
  • Complete with all required installation hardware
  • 5 Year Warranty on Speakers / 3 Year Warranty on Amplifier
  • Note: May require a OEM or Techno Research dealer radio software “re-flash”

$799.95

Orders received by 3pm (eastern standard time) will typically ship same day. Orders received after 3pm will be shipped on the next business day. Tracking numbers will be emailed to the email address provided to us by Paypal. For more shipping information please click here.


INCLUDED IN KIT

Count Item
1 WBA 400.2 400 Watt Amplifier
1 FLH Specific Custom Amplifier Mounting Plate
2 WBC 1654 6.5" front speakers
8 Stainless speaker mounting screws
1 Plug & play input audio harness
1 Plug & play ouptut audio harness
1 Custom 10 gauge power harness
10 Nylon cable ties
1 Easy to follow installation manual


VEHICLE COMPATIBLITY

  • Street Glide® 2014-up
  • Street Glide® Special 2014-up
  • Electra Glide® Ultra Classic® 2014-up
  • Ultra Limited 2014-up
  • Ultra Limited Low 2014-up
  • Tri Glide® Ultra 2014-up


SUPPORT MATERIAL

INCLUDED IN KIT

Count Item
1 WBA 400.2 400 Watt Amplifier
1 FLH Specific Custom Amplifier Mounting Plate
2 WBC 1654 6.5" front speakers
8 Stainless speaker mounting screws
1 Plug & play input audio harness
1 Plug & play ouptut audio harness
1 Custom 10 gauge power harness
10 Nylon cable ties
1 Easy to follow installation manual

Everything you need comes in one box!

VEHICLE COMPATIBLITY

  • Street Glide® 2014-up
  • Street Glide® Special 2014-up
  • Electra Glide® Ultra Classic® 2014-up
  • Ultra Limited 2014-up
  • Ultra Limited Low 2014-up
  • Tri Glide® Ultra 2014-up


AMPLIFIER SPECIFICATION

  • Wild Boar Audio Class-D technology
  • 4 Ohm Impedance Constant Power
  • 200 watts x 2 channels @ 4 Ohms
  • Max current - lowest impedance 28.4 A
  • Idle current 1.0 A
  • Battery voltage limits <9V - >16V
  • THD+N @ 4 Ohms rated power 0.71%
  • 10 AWG power/ground connector
  • Real time thermal sensing
  • Extruded aluminum heat sink
  • Discrete surface mount technology
  • 3 Year Warranty


SPEAKER SPECIFICATION

  • Element Ready design that is weather and water resistant
  • Ultra‐Efficient 25mm Titanium Dome Tweeter
  • Omni Radiating Reflector Technology Tweeter Housing (See below)
  • Carbon‐Fiber Cone
  • High Power 40mm Voice‐Coil
  • Santoprene Surround
  • Poly‐Cotton Spider
  • Ultra‐High Temperature Glass Polymer Basket
  • Integrated Spade Terminals
  • Integrated High Power 2 way Crossover with studio grade components
  • Poly Thermal Coefficient Tweeter Protection
  • NOTE: May not be compatible with CVO™ and Screaming Eagle™ models
  • 5 Year Warranty


Omni Radiation Reflector Technology Explained



There are two main components that make up the Omni-Radiating Reflector, and both are crucial to its operation. Firstly, sound waves act in a similar manner to light in that they can be reflected off hard surfaces. A concave- or bowl-shaped surface will tend to concentrate any sound waves hitting it at a point in the centre of the bowl while a convex (turn that bowl upside down) surface will disperse sound waves in all directions.
As the wavelengths of the frequencies being reproduced by a driver become small relative to the size of the driver's diaphragm, the dispersion of the driver begins to decrease until such time that it is only radiating from a small point at the centre of the driver, otherwise known as ‘beaming.’ We normally sidestep this problem by crossing over to a smaller driver (tweeter) at a frequency where beaming from the driver is not yet occurring. However, even before severe beaming takes place, the driver's natural dispersion begins to narrow. We designed a convex reflector with the natural radiation properties of a cone mid-woofer at the same time. With the convex reflector placed centrally above the woofer, the frequencies where the woofer is starting to beam will be reflected off of the convex surface and uniformly dispersed. We are actually using the limited dispersion of the woofer at high frequencies to aid in the overall dispersion of the loudspeaker. From a measurement standpoint, the off-axis measurements of a loudspeaker using the Omni-Radiating Reflector will be very similar, both in the horizontal and vertical planes. The confirmation of this is that the total-radiated sound power (an averaging of horizontal and vertical frequency responses measured 180 degrees) is nearly identical to the on-axis response.
The Omni-Radiating Reflector is a technology that allows us to create a perceived soundfield that is very close to what we hear in reality.
And isn't mimicking reality the end goal of all loudspeaker designs?

AMPLIFIER SPECIFICATION

  • Wild Boar Audio Class-D technology
  • 4 Ohm Impedance Constant Power
  • 200 watts x 2 channels @ 4 Ohms
  • Max current - lowest impedance 28.4 A
  • Idle current 1.0 A
  • Battery voltage limits <9V - >16V
  • THD+N @ 4 Ohms rated power 0.71%
  • 10 AWG power/ground connector
  • Real time thermal sensing
  • Extruded aluminum heat sink
  • Discrete surface mount technology
  • 3 Year Warranty

SPEAKER SPECIFICATION

  • Element Ready design that is weather and water resistant
  • Ultra‐Efficient 25mm Titanium Dome Tweeter
  • Omni Radiating Reflector Technology Tweeter Housing
  • Carbon‐Fiber Cone
  • High Power 40mm Voice‐Coil
  • Santoprene Surround
  • Poly‐Cotton Spider
  • Ultra‐High Temperature Glass Polymer Basket
  • Integrated Spade Terminals
  • Integrated High Power 2 way Crossover with studio grade components
  • Poly Thermal Coefficient Tweeter Protection
  • NOTE: May not be compatible with CVO™ and Screaming Eagle™ models
  • 5 Year Warranty

6.5" Speakers Only (Street Glide®)


6x9" Speakers


Orders received by 3pm (eastern standard time) will typically ship same day. Orders received after 3pm will be shipped on the next business day. Tracking numbers will be emailed to the email address provided to us by Paypal. For more shipping information
please click here

6.5" Speakers Only (Street Glide®)

6x9" Speakers

Omni-Radiating Reflector Explained

There are two main components that make up the Omni-Radiating Reflector, and both are crucial to its operation. Firstly, sound waves act in a similar manner to light in that they can be reflected off hard surfaces. A concave- or bowl-shaped surface will tend to concentrate any sound waves hitting it at a point in the centre of the bowl while a convex (turn that bowl upside down) surface will disperse sound waves in all directions.
As the wavelengths of the frequencies being reproduced by a driver become small relative to the size of the driver's diaphragm, the dispersion of the driver begins to decrease until such time that it is only radiating from a small point at the centre of the driver, otherwise known as ‘beaming.’ We normally sidestep this problem by crossing over to a smaller driver (tweeter) at a frequency where beaming from the driver is not yet occurring. However, even before severe beaming takes place, the driver's natural dispersion begins to narrow. We designed a convex reflector with the natural radiation properties of a cone mid-woofer at the same time. With the convex reflector placed centrally above the woofer, the frequencies where the woofer is starting to beam will be reflected off of the convex surface and uniformly dispersed. We are actually using the limited dispersion of the woofer at high frequencies to aid in the overall dispersion of the loudspeaker. From a measurement standpoint, the off-axis measurements of a loudspeaker using the Omni-Radiating Reflector will be very similar, both in the horizontal and vertical planes. The confirmation of this is that the total-radiated sound power (an averaging of horizontal and vertical frequency responses measured 180 degrees) is nearly identical to the on-axis response.
The Omni-Radiating Reflector is a technology that allows us to create a perceived soundfield that is very close to what we hear in reality.
And isn't mimicking reality the end goal of all loudspeaker designs?
Stacks Image 1062
Stacks Image 1068
Stacks Image 1065